![]() Right-click the network adapter of Surfshark and go to Properties.This adapter will be used for sharing the internet connection from your Windows PC. You will notice that a new network adapter has appeared right after enabling the hotspot.You can set your preferred name and password by clicking Edit. Network password is the password that you will need to enter in order to connect to this network. Network name is the name of the network that will appear on other devices when searching for new Wi-Fi connections. Underneath, you will see information about this hotspot network. Turn on the Mobile hotspot by moving a switch.Right-click the network icon on your Windows toolbar and choose to Open Network & Internet settings again. Next - you will activate hotspot on your Windows device.Keep this window open and proceed to the next step. The second adapter is the Wi-Fi adapter that allows connecting to a Wi-Fi network. In this picture, network adapter no.1 is Surfshark TAP (you can see the Surfshark name there). A window with all network adapters installed on your device will show up.In the next window, scroll down a little, and you will find a setting to Change adapter options.If you are connected via Ethernet cable, choose Ethernet. If you are connected to the internet via Wi-Fi, go to the Wi-Fi tab.Firstly, right-click the Wi-Fi or Wired connection icon on your Windows toolbar.To follow along, you will need a Windows computer, the Surfshark VPN app, and an active Surfshark VPN subscription.ĭon't have a subscription yet? Get Surfshark here! This will automatically reinstall your WAN Miniport devices.In this tutorial, you will learn how to set up a VPN-protected Wi-Fi hotspot using a Windows computer. On the Device Manager menu bar, select Action > Scan for hardware changes.Here are some adapters that you may observe: Right-click all the network adapters whose name starts as "WAN Miniport," and then select Uninstall device.If the previous scenarios don't apply, or if the steps don't fix the error, reinstall the WAN Miniport (IP) interface driver: Scenario 3: Reinstall WAN Miniport (IP) interface drivers Run this command: Disable-NetAdapterBinding -Name "" -IncludeHidden -AllBindings -ComponentID ![]() True WFP Native MAC Layer LightWeight ms_wfplwf_lower True Remote Access IP ARP Driver ms_wanarp True If you see that a third-party filter driver is bound (as shown in the following example output), disable it by running the provided command. Scenario 2: A third-party filter driver is bound Run this command: Enable-NetAdapterBinding -Name "" -IncludeHidden -AllBindings -ComponentID ms_wanarp Remote Access IP ARP Driver ms_wanarp False WFP Native MAC Layer LightWeight ms_wfplwf_lower True If you see that ms_wanarp is disabled (as shown in the following example output), re-enable it by running the provided command. ![]() ![]() Scenario 1: Remote Access IP ARP Driver is disabled Get-NetAdapterBinding -Name "" -IncludeHidden -AllBindingsīased on the output, choose the appropriate troubleshooting scenario from the following options, and follow the provided steps. Run the following command by using the Name value that you verified in step 2. Get-NetAdapter -IncludeHidden | Where-Object įor example, the name can be Local Area Connection* 6. Run the following command, and search for the Name value of the WAN Miniport (IP) interface. Open an elevated Windows PowerShell window. To troubleshoot the error, start by checking the linked driver of your WAN Miniport (IP): There are several scenarios that can cause this error. This is true even though the WAN Miniport (IP) adapter might look healthy when you examine the Network adapters node in Device Manager. Get network adapter binding on the clientĮrror 720 : ERROR_PPP_NO_PROTOCOLS_CONFIGURED typically occurs if the WAN Miniport (IP) adapter is not bound correctly on your PC. The static IP address that's configured in the Active Directory user properties can't be assigned.The DHCP server for the RRAS is not available or its scope is exhausted.On the server side, check whether any of the following issues occurs: The error code returned on failure is 720. You might need to change the network settings for this connection.Īdditionally, RasClient event ID 20227 (that mentions error 720) is recorded in the Application log: Log Name: Applicationĭescription: The user dialed a connection named VPN Connection which has failed. When you try to establish a VPN connection, you receive the following error message:Ī connection to the remote computer could not be established. This article discusses how to troubleshoot error 720 that occurs when you try to establish a VPN connection.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |